Start Here

How do you Change, Replace, or Install Broken 2003-2007 Cadillac CTS Front Door Panel (Interior) Replacement

Fits years: 2003, 2004, 2005, 2006, 2007

All Cadillac CTS for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver


Step 1: Open the vehicle's door.

Step 2: Pry and remove the interior door handle's bezel. Disconnect the wiring harness (1).

Step 3: Pry and remove the locking lever near the TOP of the interior door panel.

Step 4: Pry and remove the trim panel inside the interior door pull. Loosen and remove the Phillips screws (2).

Step 5: Pry and separate the interior door panel from the door frame.


A series of retaining clips secures the panel to the door frame. As you work your way around the outer edge of the panel, you will hear them "pop" free.

Step 6: You can now LIFT and remove the interior door panel.

Step 7: To reattach the interior door panel, use the large retaining clips as your guides, and move the panel into position on the frame. Once in position, use a FIRM, but not too firm, strike near each retaining clip to "snap" them back into place.

Step 8: Tighten the Phillips screws (2). Reattach the trim panel.

Step 9: Reattach the locking lever.

Step 10: Connect the wiring harness (1) to the back of the interior door handle's bezel. Snap the bezel back into place.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Cadillac CTS Replacement Instructions

Average Rating: 4.8 of 5 stars
34 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.