Start Here

How do you Change, Replace, or Install Broken 2003-2007 Saturn Ion Tail Light Replacement

Fits years: 2003, 2004, 2005, 2006, 2007

All Saturn Ion Tail Lights for sale Tools required:
  • T10 Torx Driver


Step 1: Open the vehicle's trunk.

Step 2: Loosen and remove the 3 T10 Torx screws exposed by opening the trunk.


These screws are along the tail light assembly's inner edge.

Step 3: You can now pull the tail light assembly from the vehicle.

Step 4: Disconnect the wiring harnesses from the tail light.


Some models may require turning the sockets counter-clockwise and removing them from the old assembly. You can easily attach them to the new assembly.

Step 5: Connect the wiring harnesses to the new tail light assembly.

Step 6: Mount and secure the tail light by tightening the three T10 Torx screws.


Use the guiding tabs on the assembly to ensure proper installation.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Saturn Ion Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
10 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.