Start Here

How do you Change, Replace, or Install Broken 2003-2012 Volvo XC90 Upper Rear Reflector Replacement

Fits years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

All Volvo XC90 for sale Tools required:

  • 10mm socket/ratchet

Step 1: Open the vehicle's rear door.

Step 2: Lift the trunk's floorboard cover. Detach the under-panel from the vehicle and remove it.

Step 3: Remove the access panel from the side in which you're replacing the reflector.

Step 4: Loosen and remove the 10mm bolts (2) exposed by removing the side trim panel.

These bolts are elongated, so they will look more like an Allen Wrench than a bolt!

Step 5: You can now pull and remove the tail light assembly from the vehicle.

Step 6: Loosen and remove the 10mm bolts (2) on the upper and lower ends of the rear reflector.

Step 7: You can now pull the rear reflector from the vehicle.

Step 8: Mount the new rear reflector by tightening the 10mm mounting bolts (2).

Step 9: Reattach the tail light assembly by tightening the 10mm bolts (2) INSIDE the trunk area.

Step 10: Reattach the trim panel and floor-board panels.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011, 12 2012 Volvo XC90 Replacement Instructions

Average Rating: 4.9 of 5 stars
18 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.