Start Here

How do you Change, Replace, or Install Broken 2004-2006 Nissan Sentra Spark Plug Replacement

Fits years: 2004, 2005, 2006

All Nissan Sentra for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • 10mm socket/ratchet

  • 5/8 spark plug socket/ratchet with extension

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 10mm bolt that secures the ignition coil to the top of the valve cover.

Step 3: Disconnect the ignition coil's wiring harness (1).

Step 4: Lift and remove the ignition coil from the vehicle.

Step 5: Using the 5/8 spark plug socket/ratchet with extension, loosen and remove the spark plug (1).

NOTE: Most spark plugs come already "gapped". If you'd like to double check the gapping, use a gauge to gap them to .044.

Step 6: Insert the spark plug into the socket, and insert it into place. Tighten the spark plug FIRMLY, but don't OVERTIGHTEN!

Step 7: Insert the ignition coil into place, and secure it by tightening the 10mm bolt (1).

Step 8: Connect the ignition coil's wiring harness (1).

Step 9: Repeat this process for the remaining spark plugs.
These Part Change / Installation Instructions Apply to:

04 2004, 05 2005, 06 2006 Nissan Sentra Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.