How do you Change, Replace, or Install Broken 2004-2010 Toyota Sienna Front Door Handle (Interior) Replacement
Fits years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
- Phillips screwdriver
- Flathead screwdriver
Step 1: Open the vehicle's door.
Step 2: Pry and remove the small trim panel near the side mirror mount.
Step 3: Pry and remove the trim panel INSIDE the interior door handle. Loosen and remove the Phillips screw (1).
Step 4: Loosen and remove the Phillips screws (2) located inside the interior door pull cup and beneath the arm rest.
Step 5: Using the Phillips screwdriver, remove the Phillips retaining clip (1) located near the door latch.
Step 6: Lift and remove the power window switch plate/arm rest. Disconnect the wiring harness (1).
Step 7: Loosen and remove the Phillips screws (2) exposed in Step 6.
Step 8: You can now pry and separate the interior door panel from the door frame.
A series of retaining clips secures the panel to the door frame. You will hear them "pop" as they disengage.
Step 9: Disengage the locking cables (2) from the BACK of the interior door handle. Disconnect the wiring harness (1).
Step 10: Using the flathead screwdriver, pry and remove the interior door handle through the FRONT of the interior door panel.
Step 11: "Snap" the NEW interior door handle into place on the door panel.
Step 12: Reattach the interior door panel.
Be sure to re-engage the locking cables (2), connect the wiring harnesses (2), and tighten the Phillips screws. Also, reattach all trim panels.
04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010 Toyota Sienna Replacement Instructions
- 1998-2003 Toyota Sienna Corner Light Replacement
- 1998-2003 Toyota Sienna Headlight Replacement
- 1998-2003 Toyota Sienna Tailgate Handle Replacement
- 1998-2003 Toyota Sienna Side Mirror Replacement
- 2004-2010 Toyota Sienna Front Door Handle (Interior) Replacement
- 2004-2010 Toyota Sienna Side Mirror Replacement