Start Here

How do you Change, Replace, or Install Broken 2004-2012 Chevrolet Colorado Front Door Panel (Interior) Replacement

Fits years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

All Chevrolet Colorado for sale Tools required:

  • Phillips screwdriver


Step 1: Open the vehicle's door.

Step 2: Loosen and remove the Phillips screws (2) located inside the interior door pull.

Step 3: Lift and remove the window control switch-plate. Disconnect the wiring harnesses (3) from the underside of this switch-plate.

Step 4: Loosen and remove the Phillips screw (1) inside the interior door handle.

Step 5: Pry and remove the interior door handle's bezel.

Step 6: Pry and remove the small trim panel covering the side mirror's mounting area.

Step 7: You can now pry and remove the interior door panel from the door frame.


NOTE: If any retaining clips stayed with the door, pry and remove them. Reattach them to the interior door panel.

Step 8: Disconnect the speaker's wiring harness (1).

Step 9: To reattach the interior door panel, reconnect the speaker's wiring harness (1), pull the wiring harnesses through the opening in the door, and with a firm "strike", "snap" all of the retaining pins back into place.

Step 10: Reattach the trim panel covering the side mirror's mounting area.

Step 11: Reattach the interior door handle's bezel.

Step 12: Tighten the Phillips screw (1) inside the door handle.

Step 13: Reconnect the wiring harnesses (3) to the underside of the power window switch-plate. Move this panel back into position, and tighten the Phillips screws (2) inside the interior door pull.
These Part Change / Installation Instructions Apply to:

04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011, 12 2012 Chevrolet Colorado Replacement Instructions

Average Rating: 4.9 of 5 stars
40 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.