Start Here

Year

Make

Model

How do you Change, Replace, or Install Broken 2005-2005 Honda Accord Tail Light Replacement

Fits years: 2005

All Honda Accord Tail Lights for sale Tools required:
  • 10mm socket/ratchet

  • 8mm socket/ratchet

  • Phillips screwdriver

  • Flathead screwdriver


Step 1: Lift the trunk and locate the small bolt covers near the back panel trim.

Step 2: Remove the bolt covers, exposing the back bumper's retaining bolts.

Step 3: Using the 10mm socket/ratchet, remove the two 10mm bolts.

Step 4: Remove the Phillips retaining screws that line the underside of your back bumper.

Step 5: Disengage the retaining clips found on the underside of the back bumper (just beneath the trunk).

Step 6: You can now remove the rear bumper cover from the vehicle.

Step 7: Remove the two 10mm bolts beneath the tail light assembly.

Step 8: Remove the three retaining bolts located behind the removable trunk liner panel inside the vehicle's trunk.

Step 9: You can now remove the tail light assembly.

Step 10: Disconnect the wiring harness from the back of the tail light assembly.

Step 11: Connect the wiring harness to the back of the new tail light assembly.

Step 12: Secure the new tail light by tightening the three interior mounting bolts and two exterior (located beneath the assembly).

Step 13: Reattach the bumper cover by simply reversing the removal process.
These Part Change / Installation Instructions Apply to:

05 2005 Honda Accord Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

NEWSLETTER SIGN UP

© 2015 GO-PARTS. All Rights Reserved.