Start Here

How do you Change, Replace, or Install Broken 2005-2008 Toyota Tacoma Tail Light Assembly Replacement

Fits years: 2005, 2006, 2007, 2008

All Toyota Tacoma Tail Lights for sale Tools required:
  • 10mm socket/wrench

Step 1: Open the truck's tailgate to expose the bolts holding the tail light assembly in place.

Step 2: Loosen the retaining bolts.

Using the 10mm socket, loosen the two bolts that hold the assembly in place.

Step 3: The assembly can now be removed from the vehicle (with slight pressure).

Step 4: Un-plug the electrical connection from the truck to the tail light casing.

Step 5: Connect the truck's electrical plug to the corresponding plug with the new tail light assembly.

Be sure that the plug "snaps" into place to ensure a secure connection.

Step 6: Using the alignment pins as your guide, snap the new tail light assembly into place.

Step 7: While holding the light assembly in place with one hand, begin tightening the two retaining bolts to secure the tail light assembly's connection to the vehicle.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007, 08 2008 Toyota Tacoma Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
49 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.