Start Here

How do you Change, Replace, or Install Broken 2005-2009 Chevrolet Equinox Door Handle (Exterior) Replacement

Fits years: 2005, 2006, 2007, 2008, 2009

All Chevrolet Equinox for sale Tools required:

  • T25 Torx Driver

  • Flathead screwdriver

Step 1: Open the vehicle's door.

Step 2: Using the flathead screwdriver, pry and remove the round plug, exposing a T25 Torx screw (1). Loosen and remove it.

NOTE: When removing the T25 screw, BE CAREFUL not to drop the screw inside the door panel! If you do, you'll be reading up on our "Door Panel Removal" guide!

Step 3: Pull the exterior door handle out, and remove the small trim panel that covers the keyhole.

Step 4: You can now slide the door handle toward the FRONT of the vehicle and remove it.

Step 5: Slide the door handle into place. Slide it toward the FRONT of the vehicle. You will feel it "snap" into place.

Step 6: Attach the small trim panel over the keyhole.

Step 7: Tighten the T25 Torx screw (1) and cover the screw with the round rubber plug.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007, 08 2008, 09 2009 Chevrolet Equinox Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.