Start Here

How do you Change, Replace, or Install Broken 2005-2010 Chevrolet Cobalt Tail Light Replacement

Fits years: 2005, 2006, 2007, 2008, 2009, 2010

All Chevrolet Cobalt Tail Lights for sale Tools required:
  • 7mm socket/ratchet with extension

Step 1: Open the vehicle's trunk.

Step 2: Loosen and remove the 7mm mounting bolts (2) exposed by opening the trunk.

These bolts are right next to the tail light assembly.

Step 3: Loosen and remove the thumb-screw that holds the trunk liner over the tail light's connection point.

Step 4: Loosen and remove the thumb-screw that holds the tail light assembly to the vehicle.

Step 5: You can now pull the tail light assembly from the vehicle.

Step 6: Disconnect the tail light's wiring harness.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new sockets/bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist the sockets counter-clockwise, and transfer them to the new assembly. This process takes just a few moments!

Step 7: Connect the wiring harness to the new tail light assembly.

Step 8: Mount the new tail light by tightening the 7mm mounting bolts (2) and the thumb-screw (1).

Step 9: Reattach the trunk liner and tighten the thumb-screw.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010 Chevrolet Cobalt Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
24 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.