Start Here

How do you Change, Replace, or Install Broken Volvo XC90 Ignition Coil Replacement

Fits years: 0

All Volvo XC90 for sale Tools required:

  • T25 Torx Driver

  • T30 Torx Driver

  • 10mm socket/ratchet with extension

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the T25 Torx screws (2) that secure the tube across the top of the engine.

Step 3: Loosen and remove the T30 Torx screws (8) that secure the valve cover to the engine.

Step 4: Disengage the retaining tab, remove the oil cap, and remove the valve cover panel.

NOTE: We recommend replacing all of your coils in the same installation process, as they often begin failing in around the same time. However, when replacing them, do so ONE AT A TIME.

Step 5: Loosen the 10mm mounting bolt (1) that secures the ignition coil to the engine.

Step 6: Disconnect the ignition coil's wiring harness (1).

Step 7: You can now remove the ignition coil from the vehicle.

Step 9: Mount the new ignition coil by tightening the 10mm mounting bolt (1).

Step 10: Repeat this process for the remaining ignition coils.

Step 11: Reattach the valve cover panel by removing the oil cap, engaging the retaining tab, replacing the oil cap, and tightening the T30 Torx screws (8).

Step 12: Tighten the T25 Torx screws (2) that secure the tube across the valve cover.
These Part Change / Installation Instructions Apply to:

0 Volvo XC90 Replacement Instructions

Average Rating: 4.9 of 5 stars
18 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.