Step 1: Remove the triangular trim panel that covers the mirror's mounting point (on the interior).
NOTE: On Japan-built Camry's, the wiring harness is easily accessible and you won't need to remove the interior door panel. However, on North American-built Camry's, the wiring harness may connect inside the interior door panel, in which case, you'll have to remove it. The process is simple, but it doesn't take a few minutes!
Step 2: Disconnect the side mirror's wiring harness.
Step 3: Remove the three 8mm retaining bolts that secure the mirror to the door frame.
NOTE: Be sure to hold onto the side mirror as you remove the bolts, as you don't want to clean glass from your garage floor!
Step 4: Remove the side mirror.
Step 5: Feed the wiring through the door opening, and mount the mirror to the door by tightening the three 8mm retaining bolts.
Step 6: Connect the wiring harness to the new side mirror.
Step 7: Reattach the triangular trim panel.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: