Step 2: Remove the three T15 Torx screws lining the top of the headlight assembly.
NOTE: If your screws will not come off, you can break the plastic mount (on the headlight), and then use vise-grips to remove the bottom portion of the mounting bolt.
Step 3: Disconnect the headlight's wiring harness.
Step 4: You can now remove the headlight from the vehicle.
NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply turn the sockets counter-clockwise, remove them, and attach them to the new assembly. This process takes just a few moments!
Step 5: Connect the wiring harness to the new headlight assembly.
Step 6: Mount the headlight by tightening the three T15 Torx screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
97 1997, 96 1996, 95 1995, 94 1994, 93 1993 Dodge Intrepid Headlight Replacement Instructions