How do you Change, Replace, or Install 1993-1997 Dodge Intrepid Ignition Coil Replacement
Click here for all of our other replacement guides
10mm socket/ratchet with small extension
Step 1: Open the vehicle's hood. Using the 10mm wrench, disconnect the battery's negative battery cable.
Step 2: Using the flathead screwdriver, pry and release the air hose clamps (2) and remove the air intake hose from the vehicle.
Step 3: Locate the ignition coil on the PASSENGER'S side of the engine.
Step 4: Disconnect the ignition coil's wiring harness (1).
Step 5: Disconnect each sparkplug wire ONE BY ONE, and attach them to the new ignition coil.
This step ensures that you do not mix up the wires when attaching them to the new coil.
Step 6: Loosen and remove the 10mm mounting bolts (4) that secure the ignition coil to the engine.
Step 7: You can now remove the ignition coil from the vehicle.
Step 8: Mount the new ignition coil to the engine by tightening the 10mm mounting bolts (4).
Be sure to mount the ignition coil with the harness connection facing YOU.
Step 9: Connect the wiring harness (1) to the new ignition coil.
These Part Change / Installation Instructions Apply to
97 1997, 96 1996, 95 1995, 94 1994, 93 1993 Dodge Intrepid Ignition Coil Replacement Instructions
- POPULAR GUIDES: DODGE INTREPID -
1998-2004 Dodge Intrepid AC Heater Fan Blower Motor Replacement
1998-2004 Dodge Intrepid Cooling Fan Replacement
1998-2004 Dodge Intrepid Ignition Key Cylinder Replacement
1998-2004 Dodge Intrepid Tail Light Replacement
1998-2001 Dodge Intrepid Headlight Replacement
1994-1997 Dodge Intrepid Side View Mirror Replacement
1993-1997 Dodge Intrepid Cooling Fan Replacement
1993-1997 Dodge Intrepid Headlight Replacement
1993-1997 Dodge Intrepid Side Marker Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
USERNAME (Your E-Mail)
Enter email address here: