Step 1: Using the 8mm wrench, disconnect your negative battery cable.
Step 2: Locate and remove the two Phillips screws inside the interior door handle.
Step 3: Pull the interior door handle away from the interior door panel and disconnect the wiring harnesses.
You may need to use your flathead screwdriver to release the tabs that secure the wiring harnesses. You will also need to unscrew the mounting screws that attach the window switch to the interior door panel.
Step 4: Proceed with removing the interior door panel.
Step 5: With the interior door panel removed, gently remove the plastic water guard without tearing it. (We'll need to reattach it later!)
Step 6: If necessary, remove the speaker using your 6mm socket/ratchet and disconnect the wiring harness.
Step 7: Disconnect the wiring harness from your mirror.
Step 8: Remove the three 11mm retaining bolts.
Step 9: Remove the side mirror from the vehicle.
Step 10: Attach your new side mirror to the vehicle by tightening the 11mm retaining bolts and feeding the electrical harness down into the interior of the door.
Step 11: Connect the wiring harness to ensure power to the mirror.
Step 12: If necessary, reattach/reconnect the speaker.
Step 13: Reattach the interior door panel by simply reversing the removal process.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: