Step 1: Remove the trim panel that covers the mirror's mounting point.
The trim panel is located on the interior of the door. Gently pull on it, and it should pop right off.
Step 2: Using the socket/ratchet with extension, begin removing the 8mm retaining bolts that hold the mirror in place.
NOTE: Be sure to hold your mirror as you are removing the final bolt, as the mirror may begin to fall away from the door!
Step 3: Disconnect the wiring harness that supplies the mirror with power.
Step 4: Connect the wiring harness to your new side mirror.
Step 5: Secure the mirror in place by tightening the three retaining bolts.
Step 6: Reattach the trim panel that covers the mirror's mounting point.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: