Step 2: Using the T25 socket, remove the retaining bolts exposed by the lowering of the tailgate.
Step 3: You can now remove the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harness from the back of the tail light assembly.
Step 5: Connect the wiring harness to the back of the new tail light assembly.
Step 6: Secure the new assembly by tightening the T25 retaining screws.
Use the guiding pins to ensure that the tail light is properly lined up upon installation.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
01 2001, 00 2000, 99 1999, 98 1998, 97 1997, 96 1996, 95 1995, 94 1994 Dodge Ram Tail Light Replacement Instructions