Step 1: Locate the blower motor, beneath the glove compartment.
Step 2: Pull down on the wiring with a slight tug to move it out of your way.
Step 3: Remove the three 8mm retaining bolts that hold the blower motor in place.
Step 4: Disconnect the blower motor's wiring harness.
Step 5: You can now remove the blower motor from the vehicle.
Step 6: Insert the new blower motor into place and connect the wiring harness.
Step 7: Attach the cover to the component.
Step 8: Mount the blower motor by tightening the 8mm retaining bolts.
Step 9: Reattach the wiring clips that hold the bundle to the casing.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998, 97 1997, 96 1996, 95 1995, 94 1994 Ford Mustang AC Heater Blower Motor Replacement Instructions