Step 2: Using the needle-nose pliers remove the three pins that hold the trunk liner in place (covering the tail light mounting area).
Step 3: Pull the trunk liner back, exposing the back of the tail light.
Step 4: Remove the two 8mm bolts that secure the tail light to the vehicle.
Step 5: Disconnect the wiring harness.
Step 6: You can now remove the tail light.
You may need to "work" the harness through the frame as you pull the tail light out.
NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist the sockets, remove them, and attach them to the new assembly. This process takes just a few moments!
Step 7: Feed the wiring harness through the opening and mount the tail light by tightening the 8mm retaining bolts.
Step 8: Connect the tail light's wiring harness.
Step 9: Reattach the trunk liner by re-engaging the retaining pins.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
96 1996, 95 1995 Toyota Camry Tail Light Replacement Instructions