Step 1: Lift the vehicle's hood and remove the plastic cover that covers the headlight assembly access area.
Step 2: Remove the 2 Phillips mounting screws that hold the turn signal assembly in place.
Step 3: You can now pull the parking light assembly from the vehicle.
You may have to lift as you pull, as the lip of the frame may be in the way!
Step 4: Disconnect the wiring harnesses from the back of the turn signal assembly.
Step 5: Connect the wiring harnesses to the new turn signal assembly and push it into place.
Step 6: Secure the assembly by tightening the 2 Phillips retaining screws.
Step 7: Put the protective cover back into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: