Step 2: Loosen and remove the Phillips screws (2) inside the interior door pull cup.
Step 3: Loosen and remove the Phillips screw (1) near the door latch.
Step 4: Loosen and remove the Phillips screw (1) near the bottom REAR corner of the door panel.
Step 5: Using the window crank removal tool, pry and remove the manual window crank.
NOTE: After removing the window crank, depress the retaining tab on the crank to "reset"¬Ě it for installation later.
Step 6: You can now pry and remove the interior door panel from the door frame.
A series of retaining pins secures the door panel to the frame. You will hear them "pop"¬Ě as they disengage from the door frame.
Step 7: To reattach the door panel, move the panel into position (using the door handle as your guide). Once in place, a FIRM (but not too firm) strike near each retaining pin will "pop"¬Ě it back into place.
Step 8: "Snap"¬Ě the window crank back into place.
Step 9: Tighten the Phillips screws (4).
These Part Change / Installation Instructions Apply to
05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998, 97 1997, 96 1996, 95 1995 Chevrolet Cavalier Rear Door Panel (Manual Windows) Replacement Instructions