Step 1: Using the Phillips screwdriver, remove the trim panel that covers mirror's mounting point on the interior of the door.
Step 2: Remove the rubber stopper.
Step 3: Loosen and remove the 10mm retaining bolts that hold the side mirror in place.
NOTE: Be sure that you DO NOT drop the bolts inside the door panel, otherwise you'll be reading our "How to remove a door panel" resource next. Also, be sure that you hold onto the mirror as you are removing the last bolt!
Step 4: Remove the mirror.
Step 5: Attach the new side mirror by tightening the 10nm retaining bolts.
Step 6: Replace the rubber stopper.
Step 7: Gently attach the trim panel by tightening the Phillips retaining screw.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: