Step 2: Using the flathead screwdriver, disengage and remove the retaining clips (3) that hold passenger's side of the trim panel (spanning the bottom of the windshield). Lift this trim panel up just a bit.
Step 3: Loosen and remove the 8mm bolts (2) exposed by lifting the trim panel. Remove the retaining panel.
Step 4: You can now remove the air filter from beneath the trim panel.
Step 5: Insert the new air filter, and tighten the 8mm bolts (2). Replace the retaining panel.
Step 6: Re-engage the retaining clips to hold the trim panel in place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: