Step 2: Loosen and remove the Phillips screw that secures the side marker light assembly to the vehicle.
This screw is located just above where the headlight and side marker light assemblies meet.
Step 3: Using a flathead screwdriver as a lever, gently pry the side marker light from the vehicle.
Step 4: Disconnect the side marker light's wiring harness.
Step 5: Connect the wiring harness to the new side marker light.
Step 6: Using the guiding pins to ensure proper installation, move the side marker light into place, and secure it by tightening the Phillips retaining screw.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
99 1999, 98 1998, 97 1997 Subaru Outback Corner Light Replacement Instructions