Step 1: Loosen and remove the T15 screw (1) that holds the side marker light in place.
This screw is on the exterior of the side marker light lens.
Step 2: Disconnect the marker light's wiring harness.
NOTE: Some models may not utilize a wiring harness plug. If this is the case for your vehicle, simply turn the socket counter-clockwise to remove it from the existing marker light assembly.
Step 3: You can now fully remove the side marker light.
Step 4: Connect the wiring harness to the new side marker light assembly.
Step 5: Mount the side marker light by tightening the T15 Torx screw (1).
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: