Step 1: From the interior of the vehicle, remove the three pins that hold the interior liner in place.
These pins are located on the passenger's side, beneath the glove compartment. You may need to use pliers to remove them.
Step 2: Pull the interior liner down and remove the wire from the panel. Completely remove the panel.
Step 3: Your blower motor is now exposed.
Step 4: Behind the blower motor, you will find a tab that releases your wiring harness. Disengage this tab and disconnect the wiring harness.
Step 5: Using the 7/32 socket, remove the three retaining bolts.
Step 6: You can now remove the blower motor from the vehicle.
Step 7: Mount the new blower motor by tightening the three 7/32 retaining bolts and connecting the wiring harness to the new unit.
Step 8: Reattach the interior liner by re-engaging the retaining pins.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
00 2000, 99 1999, 98 1998, 97 1997 Chevrolet Venture AC Heater Blower Motor Instructions