How do you Change, Replace, or Install 1998-2000 Volvo S70 Rear Door Panel (Interior) Replacement
Click here for all of our other replacement guides
T25 Torx Driver
Flathead screwdriver (small)
Door Panel Clip Tool (or putty knife)
Step 1: Open the vehicle's REAR door.
Step 2: Pry and open the screw cover (1) inside the interior door pull. Loosen and remove the T25 Torx screw (1).
Step 3: Pry and remove the interior door handle's bezel.
Step 4: Using the door panel clip tool (or putty knife), pry and separate the door panel from the door frame.
A series of retaining clips secures the panel to the door frame. By sliding the tool along, you'll feel each pin. When you do, pry outward. It should "pop" when it disengages.
Step 5: You can now remove the interior door panel.
Step 6: Disconnect the wiring harnesses (2) from the back of the interior door panel.
Step 7: To reattach the door panel, reconnect the wiring harnesses (2), and move the panel into position.
Step 8: With a FIRM, but not too firm, strike near each retaining clip, you should be able to "snap" them back into place, securing the panel to the door frame.
Step 9: Reattach the interior door handle's bezel.
Step 10: Tighten the T25 Torx screw (1), and reattach the screw cover (1).
These Part Change / Installation Instructions Apply to
00 2000, 99 1999, 98 1998 Volvo S70 Rear Door Panel (Interior) Replacement Instructions
- POPULAR GUIDES: VOLVO S70 -
2001-2007 Volvo S70 Radiator Cooling Fan Replacement
1998-2000 Volvo S70 Door Handle (Interior) Replacement
1998-2000 Volvo S70 Front Door Panel (Interior) Replacement
1998-2000 Volvo S70 Side Mirror Replacement
1998-2000 Volvo S70 Tail Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
Enter email address here: