Step 2: Lift the two retaining clips located on the back of the headlight assembly.
Step 3: You can now pull the assembly from the vehicle.
Step 4: Disconnect the wiring harness attached to the back of the headlight assembly.
NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply remove the sockets/bulbs from the old assembly and attach them to the new one. This process takes just a few moments!
Step 5: Connect the wiring harness to the new headlight assembly.
Step 6: Secure the headlight by re-engaging the two retaining clips.
NOTE: To adjust the headlight, use an E8 socket (or 7mm) and the level that is included in the assembly.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: