How do you Change, Replace, or Install 1998-2004 Dodge Intrepid Alternator, Power Steering Belt Replacement
Click here for all of our other replacement guides
13mm socket/ratchet and a long extension
Step 1: Open the vehicle's hood.
Step 2: Locate the belt routing diagram, which is usually located near the radiator, on the UNDERSIDE of the hood, or in the owner's manual.
Step 3: Turn the 15mm bolt (1) on the belt pulley (near the radiator) COUNTER CLOCKWISE. You need to loosen this pulley a FEW turns to release some of the tension on the belt.
You may need to use a second wrench to add leverage, as the space is a little cramped.
Step 4: Loosen the 13mm belt tensioner bolt (1) using the ratchet with a long extension.
Step 5: Once the tension is released from the belt, you can remove it from the vehicle.
Step 6: Using the routing diagram we found in Step 2, route the belt around the proper pulleys.
Step 7: Once the belt is in place, tighten the 13mm belt tensioner bolt (1).
The belt should be taut, but not overly tight or stretched!
Step 8: Tighten the 15mm bolt (1) to complete the tensioning of the belt.
These Part Change / Installation Instructions Apply to
04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998 Dodge Intrepid Alternator, Power Steering Belt Replacement Instructions
- POPULAR GUIDES: DODGE INTREPID -
1998-2004 Dodge Intrepid Cooling Fan Replacement
1998-2004 Dodge Intrepid Ignition Key Cylinder Replacement
1998-2004 Dodge Intrepid Tail Light Replacement
1998-2001 Dodge Intrepid Headlight Replacement
1994-1997 Dodge Intrepid Side View Mirror Replacement
1993-1997 Dodge Intrepid Cooling Fan Replacement
1993-1997 Dodge Intrepid Headlight Replacement
1993-1997 Dodge Intrepid Ignition Coil Replacement
1993-1997 Dodge Intrepid Side Marker Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
Enter email address here: