Step 2: Using the flathead screwdriver, remove the pins that hold the trunk liner in place.
You only need to remove them from the area that covers the tail light's mounting point.
Step 3: Pull the trunk liner back, exposing the tail light mount.
Step 4: Loosen and remove the 3 thumb-screws that hold the tail light in place.
Step 5: You can now remove the tail light assembly.
Step 6: Disconnect the wiring harness from the back of the tail light assembly.
NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs, simply twist the sockets counter-clockwise, remove the wiring assembly, and attach it to the new tail light. This only takes a few moments!
Step 7: Connect the wiring harness to the new tail light.
Step 8: Mount the tail light by tightening the 3 hand-screws.
Step 9: Cover the area with the trunk liner and secure it by replacing the mounting pins.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: