Step 2: Loosen and remove the Phillips screw that is on the outside of the marker light assembly.
Step 3: Remove the 11mm bolt that mounts the marker light to the headlight area.
This bolt is in the area beside the headlight assembly.
Step 4: Remove the radiator panel by loosening the hand-screws that secure it in place.
Step 5: You can now pull the marker light from the vehicle.
Step 6: Disconnect the wiring harness that is attached to the marker light.
NOTE: If you ordered your replacement marker light from Go-Parts, it likely includes a new bulb/socket, as most of our models do. This saves you an installation step! However, if your particular model does include the bulb, simply turn the socket counter-clockwise to remove it, and attach it to the new assembly.
Step 7: Connect the wiring harness to the back of the marker light.
Step 8: Mount the marker light by tightening the 11mm bolt and Phillips screw.
Step 9: Reattach the radiator protective cover.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: