Step 1: Disconnect the wiring harness from the back of the fog light assembly.
Step 2: Loosen and remove the two 10mm mounting bolts that hold the fog light assembly in place.
These bolts are located on top of the assembly.
Step 3: You can now pull the fog light assembly from the vehicle.
You may need to pull the plastic protection panel down a bit to create enough room for removal.
NOTE: Be sure to lengthen or shorten the alignment rod on the back of the new assembly to match that of the old one. This ensures proper lighting alignment when the unit is in use.
Step 4: Mount the new fog light assembly by tightening the two 10mm mounting bolts.
Step 5: Connect the wiring harness to the back of the new fog light assembly.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: