Step 1: Remove the 7mm bolt that is on the top of the headlight assembly.
Step 2: Using the flathead screwdriver, gently pry the headlight away from the vehicle.
Step 3: Remove the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harness on the back of the assembly.
NOTE: If you purchased your replacement headlight from Go-Parts, it may come complete with new bulbs. If so, you won't have to worry about unscrewing the sockets from the old headlight assembly!
Step 5: Connect the wiring harness to the new headlight assembly.
Step 6: Properly position the new headlight assembly and tighten the 7mm retaining bolt to secure it.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999 Jeep Grand Cherokee Headlight Replacement Instructions