Step 2: Lift and remove the trim panel that spans the width of the trunk (near the trunk latch).
Step 3: Pull the trunk liner back to expose the tail light's mounting area.
Step 4: Loosen and remove the thumb-screws (3) that hold the tail light to the vehicle.
Step 5: You can now remove the tail light from the vehicle.
Step 6: Disconnect the wiring harness attached to the tail light.
Step 7: Connect the wiring harness to the new tail light assembly.
Step 8: Mount the tail light by tightening the thumb-screws (3).
Step 9: Replace the trunk liner and trim panel.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: