Step 1: Using the flathead screwdriver, remove the retaining clips/plugs that hold the protective plastic radiator cover in place.
Step 2: By peeling the cover back, access the retaining clips that hold the headlight assembly in place.
Use your pliers to disengage these retaining clips.
Step 3: Pull the headlight assembly from the vehicle and disconnect the wiring harnesses.
Step 4: In the space now exposed by the removal of the headlight, you can now reach the 10mm retaining bolts that secure the fog light.
Step 5: Disconnect the wiring harness and remove the fog light assembly.
Step 6: Connect the new fog light assembly to the wiring harness.
Step 7: Tighten the 10mm retaining bolts to secure the fog light's position.
Step 8: Reconnect the headlight assembly's wiring harnesses and secure the assembly into place using the retaining clips.
Step 9: Secure the plastic radiator cover.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999 Pontiac Grand Am Fog Light Replacement Instructions