Step 2: Remove the thumb-screw that holds the trunk liner in place (over the tail light assembly.
Step 3: Remove the four thumb-screws that secure the tail light assembly to the chassis.
Step 4: You can now pull the tail light assembly from the chassis.
Step 5: Disconnect the wiring harness from the back of the tail light assembly.
Step 6: Connect the wiring harness to the back of the tail light assembly and insert it into the vehicle's chassis.
Step 7: Tighten the thumb-screws to secure the new tail light assembly into place.
Step 8: Replace the trunk liner by re-engaging the thumb-screw retainer.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: