NOTE: In this installation, we'll be removing the headlight assembly. If you are replacing your fog light due to damage or wear, it may be a great time to replace the headlight also. After all, it'll never be easier than it is right now!
Step 1: Open the vehicle's hood.
Step 2: Remove the two 10mm retaining bolts that hold the headlight in place.
These bolts are located on top of the headlight assembly.
Step 3: Pull the headlight from the vehicle and disconnect the wiring harnesses attached to it.
Step 4: Reaching into the space created by removing the headlight, loosen and remove the 10mm bolt that holds the fog light in place.
Step 5: You can now push the fog light assembly through the front of the bumper cover.
Step 6: Disconnect the fog light's wiring harness.
Step 7: Connect the wiring harness to the new fog light assembly.
Step 8: Secure the fog light by tightening the 10mm mounting bolt.
Step 9: Reconnect the headlight assembly's wiring harnesses, and mount it by tightening the 10mm retaining bolts.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: