8mm OR 10mm socket/ratchet with extension (depending on model year)
Step 1: Open the vehicle's hood.
Step 2: Loosen and remove the 10mm bolts (3) that secure the headlight assembly to the vehicle.
The bolt size may vary, depending on your model. Two bolts are located on TOP of the assembly, while the final bolt is located just to the interior of the turn signal (inside the grille).
Step 3: You can now pull the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harnesses (2) from the BACK of the assembly.
NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new sockets/bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply TWIST the sockets COUNTER CLOCKWISE to remove them from the assembly.
Step 5: Connect the wiring harnesses (2) to the new headlight assembly.
Step 6: Mount the headlight to the vehicle by tightening the 10mm bolts (3).
These Part Change / Installation Instructions Apply to
02 2002, 01 2001, 00 2000 Dodge Neon Headlight Replacement Instructions