Step 1: Using the Phillips screwdriver, remove the two retaining screws that hold the tail light assembly in place.
They are located on the interior of the assembly, and are exposed by raising the tailgate of the vehicle.
Step 2: You can now remove the tail light assembly from the vehicle.
Step 3: Disconnect the wiring harness on the back of the tail light assembly.
NOTE: If you purchased your replacement tail light from Go-Parts, it likely includes the bulbs, which can save you bulb removal steps!
Step 4: Attach the wiring harness to the back of your new tail light assembly.
Step 5: Insert your new tail light assembly into place and secure by tightening the two Phillips retaining screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: