Step 2: Pry and remove the armrest pad on the door panel.
Step 3: Pry and remove the window control switch-panel. Disconnect the wiring harness (1) attached to its underside.
Step 4: Loosen and remove the 10mm bolts (2) exposed by removing the window control panel.
Step 5: Disengage the Phillips retaining clip (1) just below the side mirror's mounting point.
Simply turn the clip head and remove the clip.
Step 6: Loosen and remove the Phillips screw (1) on the bottom edge of the interior door panel.
Step 7: Pry and remove the interior door handle's bezel.
Step 8: Pry and remove the interior door panel.
Step 9: Pry and remove the small trim panel that covers the side mirror's mounting point.
Step 10: Disconnect the side mirror's wiring harness.
Step 11: Loosen and remove the 10mm mounting bolts (3).
NOTE: Be sure to hold onto the mirror while removing these bolts, as you don't want to sweep broken glass from your garage floor or driveway!
Step 12: You can now remove the side mirror from the vehicle.
Step 13: Feed the wiring harness through the opening in the door frame, and mount the new side mirror assembly by tightening the 10mm mounting bolts (3).
Step 14: Connect the side mirror's wiring harness.
Step 15: Reattach the trim panel that covers the mirror's mounting area.
Step 16: Reattach the interior door panel.
Simply reverse the removal process. Be sure to tighten the 10mm mounting bolts (2), re-engage the Phillips screws, and reconnect the wiring harness!
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: