Step 1: Access the fog light assembly from underneath the front end of the truck.
Step 2: Locate and remove the three 10mm retaining bolts that hold the fog light assembly in place.
The top retaining bolt may require a smaller extension, as there isn't much room to work!
Step 3: With the retaining bolts removed, disconnect the wiring harness from the back of the fog light and remove it from the vehicle.
Step 4: Connect the wiring harness to the back of your new fog light and move it into position.
Step 5: Secure the new fog light by tightening the three 10mm retaining bolts.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: