Quick Parts Search
Quick Parts Search
Need Some Help?

Go-parts Reviews - SiteJabber

How do you Change, Replace, or Install Broken 2000-2007 Chevrolet Monte Carlo Door Panel Replacement

Fits Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

Tools required:

  • T27 Torx Bit

  • Phillips screwdriver

  • Flathead screwdriver

  • Putty Knife and towel (to prevent scratches)

Step 1: Remove the two Phillips screws, located inside the interior door handle and near the interior side mirror trim panel.

Step 2: Remove the two T27 Torx screws located just beneath the power window control panel.

Step 3: Gently remove the trim panel centered on the interior door panel. Disconnect the wiring harness on the back of the trim panel using a flathead screwdriver.

Step 4: Using the putty knife (with a towel to prevent scratching), gently pry the interior door panel away from the door frame.

Work your way around the outside edge of the panel. You will feel the clips disengage.

Step 5: Disconnect the side mirror and power window panel wiring harnesses.

Step 6: You can now remove the interior door panel from the vehicle's door frame.

Step 7: For reinstallation, simply reconnect the wiring harnesses, line-up the door panel with the clips, and gently snap it into place.

Step 8: Reconnect the interior door handle's wiring harness, snap the trim panel into place, and tighten the two Phillips and two T27 Torx screws into place.

These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000 Chevrolet Monte Carlo Door Panel Replacement Instructions

2000-2007 Chevrolet Monte Carlo Power Window Switch Replacement

2000-2005 Chevrolet Monte Carlo Headlight Assembly Replacement

2000-2005 Chevrolet Monte Carlo Side Mirror Replacement

Your cart is completely and totally empty!

USERNAME (Your E-Mail)

Sign UpForgot Password

Enter email address here:

Official PayPal Seal