Step 2: Loosen and remove the T27 Torx bolts (2) that secure the handle assembly to the door.
Step 3: You can now remove the rear door handle assembly.
NOTE: This component has a tendency to seize, which is why we recommend lubricating the inner assembly before attaching the new handle! Spray the latches at the TOP and BOTTOM of the door.
Step 4: Slide the new rear door handle assembly into position.
Step 5: Secure the new handle by tightening the T27 Torx bolts (2).
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out:
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000 Chevrolet Silverado Extended Cab Rear Door Handle Replacement Instructions