Step 2: Loosen and remove the 10mm bolts (2) that are on either side of the grille.
Step 3: Inside the wheel wells, remove the retaining clips that hold the protective panel to the bumper cover.
These clips (3 on each side and 2 beneath the grille) can be removed using a Phillips screwdriver. Unscrew the center and pull the clip from the hole.
Step 4: Pull the wheel well cover back, exposing another clip (one on each side). Remove these clips.
Step 5: Remove the 10mm bolts (8) that are on the underside of the bumper cover.
Step 6: You can now remove the vehicle's bumper cover.
Step 7: Disconnect the wiring harnesses attached to the fog light assemblies (each side).
Step 8: Loosen and remove the bolts that hold the fog light assembly in place.
Step 9: Mount the new fog light assembly. Attach the wiring assemblies for each side.
Step 10: Begin remounting the bumper cover.
Simply reverse the removal process!
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: