How do you Change, Replace, or Install Broken 2001-2004 GMC Sonoma Power Window, Door Lock Switch Replacement
Fits Years: 2001, 2002, 2003, 2004
Click here for all of our other replacement guides
Step 1: Open the vehicle's door.
Step 2: Pry and lift the power window switch plate from the interior door panel.
Step 3: Disconnect the wiring harnesses (4) from the underside of the switch plate.
You may need to use (2) flathead screwdrivers to remove one or two of these harnesses, as they can be lodged in there pretty solidly!
Step 4: Using the flathead screwdriver, pry and remove the power window switch from the switch plate. You will have to do this on EACH END.
Step 5: Snap the new power window/lock switch into the switch-plate.
Be sure that the switch is secure, as you should hear it when it "snaps" into place.
Step 6: Connect the wiring harnesses (4) to the underside of the power window switch.
Step 7: "Snap" the power window control plate back into the interior door panel.
These Part Change / Installation Instructions Apply to
04 2004, 03 2003, 02 2002, 01 2001 GMC Sonoma Power Window, Door Lock Switch Replacement Instructions
- POPULAR GUIDES: GMC SONOMA -
2003 GMC Sonoma 4.3L Serpentine Belt Tensioner Replacement
1999-2004 GMC Sonoma Door Handle (Interior) Replacement
1999-2004 GMC Sonoma Side Mirror Replacement
1998-2004 GMC Sonoma Front Door Handle (Exterior) Replacement
1998-2004 GMC Sonoma Side Mirror Replacement
1996-2004 GMC Sonoma Front Door Panel (Interior) Replacement
1994-2004 GMC Sonoma Tail Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
USERNAME (Your E-Mail)
Enter email address here: