Step 2: Disengage the Phillips retaining screw/clip that holds the side marker assembly to the vehicle.
This clip has a Phillips "head", and by turning it slightly, you can disengage the retaining clip.
Step 3: With a firm tug, you can now pull the side marker assembly from the vehicle.
Step 4: Disconnect the wiring harnesses attached to the side marker assembly.
Step 5: Connect the wiring harness to the new side marker assembly.
Step 6: Using the guiding tabs to ensure proper installation, slide the assembly into place.
You will also feel a "snap", as the retaining clip near the bottom of the assembly snaps into place.
Step 7: Secure the side marker light assembly by tightening the Phillips retaining clip.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: