Step 2: Loosen and remove the Phillips screw that holds the side marker light in place.
This screw is located on top of the headlight assembly.
Step 3: You can now pull the marker light assembly from the vehicle.
Step 4: Disconnect the marker light's wiring harness.
NOTE: Some models may require turning the socket counter-clockwise and removing it from the marker assembly. If this is the case, you can simply screw it into the new marker light casing upon installation.
Step 5: Connect the wiring harness to the new side marker assembly, and move it into position.
Use the guiding tabs to ensure proper placement.
Step 6: Secure the side marker assembly by tightening the Phillips screw.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
04 2004, 03 2003, 02 2002, 01 2001 Toyota Tacoma Corner Light Replacement Instructions