How do you Change, Replace, or Install 2001-2005 Honda Civic Rear Bumper Cover Replacement
Click here for all of our other replacement guides
8mm socket/ratchet with extension
10mm socket/ratchet with extension
Step 1: Open the vehicle's trunk.
Step 2: Loosen and remove the 8mm bolts (2 "“ 1 per side) inside each rear wheel well.
Step 3: Loosen and remove the Phillips screws (2 "“ 1 per side) inside each rear wheel well.
Step 4: Using the flathead screwdriver, pry and remove the screw covers (2 "“ 1 per side) exposed by opening the trunk. In doing so, you expose a 10mm bolt. Loosen and remove this bolt.
Step 5: Disengage the retaining clips that line the underside of the rear bumper cover.
To disengage these clips, use a flathead screwdriver to pry out the center of the clip. You can then pull the clip from its position.
Step 6: You can now pull each side of the bumper cover free, and remove it from the vehicle.
Step 7: To reattach the bumper cover, move it into position, and tighten the 8mm bolts and Phillips screws (1 per side).
Step 8: Tighten the 10mm bolts (2) and cover the bolts with the screw covers.
Step 9: Re-engage the retaining clips that line the underside of the bumper cover.
These Part Change / Installation Instructions Apply to
05 2005, 04 2004, 03 2003, 02 2002, 01 2001 Honda Civic Rear Bumper Cover Replacement Instructions
- POPULAR GUIDES: HONDA CIVIC -
2001-2005 Honda Civic AC Heater Blower Motor Replacement
2001-2005 Honda Civic Deck Lid Tail Light Replacement
2001-2005 Honda Civic Door Handle (Interior) Replacement
2001-2005 Honda Civic Front Bumper Cover Replacement
2001-2005 Honda Civic Front Door Panel Replacement
2001-2005 Honda Civic Radiator Grille Replacement
2001-2005 Honda Civic Rear Door Panel (Interior) Replacement
2001-2005 Honda Civic Tail Light Replacement
1992-1002 Honda Civic, Prelude, Odyssey Dome Light Door Jamb Switch Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
Enter email address here: