Step 1: Pry the interior trim panel away from the mirror's mounting point.
This trim panel is triangular, and is located on the interior of your door.
Step 2: Disconnect the mirror's wiring harness.
Step 3: Loosen and remove the three 8mm retaining bolts.
NOTE: Be sure that you are holding onto your mirror as you remove the final bolt. You don't want to be cleaning broken glass up from your garage floor or driveway!
Step 4: There are small tabs that also help to hold the mirror in place. Use a small flathead screwdriver to pry these tabs away and fully remove the mirror from the vehicle.
Step 5: Mount the new mirror to the vehicle by tightening the three 8mm retaining bolts.
Step 6: Connect the mirror's wiring harness.
Step 7: Reattach the interior trim panel.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: