Step 1: Push in on the front end of the side marker light, and slide it toward the front of the vehicle.
This will disengage the retaining clip and allow you to remove the side marker light assembly.
Step 2: Disconnect the wiring harness from the back of the side marker light assembly.
NOTE: Not all models use wiring plugs for the side marker lights. If your particular model does not, simply turn the socket/bulb counter-clockwise to remove it from the existing assembly.
Step 3: Connect the wiring harness to the new side marker light assembly.
Step 4: Mount the new side marker assembly by sliding it back into position.
Slide the assembly toward the FRONT of the vehicle first, and when back into position. You should hear the retaining clip "snap" into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: